Qualifications
We bring decades of experience and wisdom to ensure the safety of your family as well as employees of commercial enterprises.
Whether it’s a problem caused by mold, asbestos, flooding, other water damage, fires, sewage back-up or other, we will see to it that your property is returned to its original, clean state.
The president of Certified Inspections, Mark Jones has been in the environmental consulting business for nearly 30 years. Some of his credentials are as follows:
Mark N. Jones
President
Certified Inspections, Inc.
– Licensed Home Inspector and Mold Assessor.
– Graduate of Kent State University
– Post-graduate work at Columbia University
– Graduate of B.O.C.E.S. course in home inspection
– Graduate of Building Specs Institute of Home Inspection
– Graduate of BTS Laboratory course in mycology (mold) identification, pathology and treatment
– Graduate of EMSL Analytical Laboratory course in Indoor Air Quality testing
– Monthly Continuing education courses through ASHI
– Author of numerous articles on inspection issues
– Experience in building design and renovation
– Frequent lecturer to real estate professionals, including recent key-note speaker at Putnam County Board of Realtors
– Membership in NAHI (National Association of Home Inspectors), NAPI (National Association of Property Inspectors), National Society of Environmental Consultants, National Environmental Health Association, AARST (American Association of Radon Scientists and Technologists), ASHRAE (American Society of Heating, Refrigeration and Air-Conditioning Engineers), National Pest Control Association, and the International Association for Energy Economics.
– Mold consultant to physicians, medical centers and hospitals, attorneys, realtors, remediators, contractors, builders, engineers and architects.
– Expert witness on mold in court cases relating to mold.
Engineers and Home Inspectors
Although often used interchangeably, a home inspector is different than an engineer.
Home inspectors are expert professional diagnosticians of all facets of the conditions of a house and its property. Their job is to red-flag any problems or potential problems, and to consult and advise their client as to an objective proper course of action without any further personal financial gain from contractors or realtors.
Engineers are licensed professionals who practice in a particular specialized technological field of design such as industrial engineering, electrical engineering, chemical engineering, civil engineering, etc. They may or may not be qualified to perform a home inspection, based upon whether they have been trained to inspect homes, and most have not. there is no such course as “Home Inspection” taught at engineering schools. Many engineers hire us to perform home inspections for them when buying their own homes. They will be the first to tell you that they are not trained or qualified to perform a complete home inspection, much less environmental testing.
Summary
A home inspector is like a general practitioner, and an engineer is like a specialist. You wouldn’t go to a dermatologist for a physical. You would first go to a G.P. and then go to a dermatologist if the G.P. found a complex skin problem. An engineer, being a specialist in only one particular field, should be called in only if a home inspector finds a specific problem that requires further evaluation.Most important, however, is the fact that neither home inspectors nor engineers are trained or licensed to perform mold assessments. That task should be only performed by a licensed mold assessor. In unregulated states such as New Jersey or Connecticut, it is best to use a New York licensed assessor who is credentialed.
– Licensed Home Inspector and Mold Assessor.
– Graduate of Kent State University
– Post-graduate work at Columbia University
– Graduate of B.O.C.E.S. course in home inspection
– Graduate of Building Specs Institute of Home Inspection
– Graduate of BTS Laboratory course in mycology (mold) identification, pathology and treatment
– Graduate of EMSL Analytical Laboratory course in Indoor Air Quality testing
– Monthly Continuing education courses through ASHI
– Author of numerous articles on inspection issues
– Experience in building design and renovation
– Frequent lecturer to real estate professionals, including recent key-note speaker at Putnam County Board of Realtors
– Membership in NAHI (National Association of Home Inspectors), NAPI (National Association of Property Inspectors), National Society of Environmental Consultants, National Environmental Health Association, AARST (American Association of Radon Scientists and Technologists), ASHRAE (American Society of Heating, Refrigeration and Air-Conditioning Engineers), National Pest Control Association, and the International Association for Energy Economics.
– Mold consultant to physicians, medical centers and hospitals, attorneys, realtors, remediators, contractors, builders, engineers and architects.
– Expert witness on mold in court cases relating to mold.
Engineers and Home Inspectors
Although often used interchangeably, a home inspector is different than an engineer.
Home inspectors are expert professional diagnosticians of all facets of the conditions of a house and its property. Their job is to red-flag any problems or potential problems, and to consult and advise their client as to an objective proper course of action without any further personal financial gain from contractors or realtors.
Engineers are licensed professionals who practice in a particular specialized technological field of design such as industrial engineering, electrical engineering, chemical engineering, civil engineering, etc. They may or may not be qualified to perform a home inspection, based upon whether they have been trained to inspect homes, and most have not. there is no such course as “Home Inspection” taught at engineering schools. Many engineers hire us to perform home inspections for them when buying their own homes. They will be the first to tell you that they are not trained or qualified to perform a complete home inspection, much less environmental testing.
Summary
A home inspector is like a general practitioner, and an engineer is like a specialist. You wouldn’t go to a dermatologist for a physical. You would first go to a G.P. and then go to a dermatologist if the G.P. found a complex skin problem. An engineer, being a specialist in only one particular field, should be called in only if a home inspector finds a specific problem that requires further evaluation.Most important, however, is the fact that neither home inspectors nor engineers are trained or licensed to perform mold assessments. That task should be only performed by a licensed mold assessor. In unregulated states such as New Jersey or Connecticut, it is best to use a New York licensed assessor who is credentialed.
